Table of Contents
Advertisement
5.8.13. Battery type
Three selections available.
No-rechargeable: standard battery type Alcalin AA, 1.2V
NiMH active Charge: to enable the charging with NiMH battery (ONLY)
NiMH disable Charge: the charging process is disable. This selection is mandatory wh/the battery
type is not NiMH type
IMPORTANT
5.8.14. Setting print
Prints the complete setting of the CP 545, the memory status, Timing Mode, accuracy, input status,
lock time and battery level
5.9.
Speed
Selectable Speed unit of measurement is m/s, Km/h, Miles/h and Knots. Four different speed
measurements can be configured betwe/the 4 inputs.
Ex: for Speed 1 betwe/inputs 2 and 3 at a distance of 10 meters:
Start Press 2, and validate
Stop Press3, and validate
Distance
To input the distance betwe/the photocells in millimetres:
Use
Wh/finished (for instance, if only one speed trap is to be configured) simply press
PLEASE NOTE
Speed measurements are possible in all the timing modes above, with the exception of
PARALLEL
5.10. Printer
Printer may be ON or OFF.
To guarantee the best printing autonomy, the speed of the printer is electronically controlled based on the
voltage of the batteries.
If the voltage decreases, the printing speed will slow down.
If the batteries fall below a certain voltage threshold, the printer will automatically stop. The running Time
of Day on the LCD will flash.
To restore the printer, connect an external power supply and th/turn the printer ON again from the menu
F.
If an external power supply is connected wh/you turn ON the CP 545, the printer will be automatically ON.
TAG Heuer Timing
The charge should be not made with a temperature lower than 0°C.
It is important to select the correct type of batteries (NiMH) to use the internal charger
circuit.
If type of battery is different than our recommended (NiMH), please disable the charging
process.
No warranty will be available if users do not respect this rule.
TAG Heuer reference for NiMH battery: STHAANiMH.
◄┘
◄┘
Press 10'000 and validate ◄┘.
to correct any input error. Re-enter the input correctly th/validate
DIFFERENTIAL,
JUMPING
(3 modes)
◄┘
F.
Page 15 / 49
Advertisement
Table of Contents
