Table of Contents
Advertisement
14. Autonomy / Batteries
Use good quality NiMH batteries for best results.
The chart below assumes timing impulses and printing happening every 6 seconds. The CP 545 is delivered
with Energizer batteries.
Battery delivered with CP 545: Sanyo
(ref TAG Heuer: STHAANiMH)
Use in low temperatures
The CP 545 is able to print on temperatures as low as -25°C!
Whenever possible, use the external power supply to extend battery life.
We recommend you consider purchasing one of the Docking Station for extended autonomy in
situations wh/AC power is unavailable.
The autonomy of the Docking BATT will allow you to print 30'000 times at 20°C and at least 10'000
times at -20°C (GPS = OFF and LCD back light at 0)
WARNING
Pay attention to the autonomy of the batteries and of the paper roll if you have to print
any times
It is recommended to set the back light of the LCD at 0 for a longer autonomy.
IMPORTANT
It is strongly recommended that you remove the battery if you are not using your
Chronoprinter 545.
If using the Docking station « HL540-BATT». You have the possibility to extend the autonomy.
TAG Heuer Timing
0°C / (32°F)
2'500
impulses
20C° / (68°F)
11'000
impulses
Page 26 / 49
Advertisement
Table of Contents
