Special Characters Memorized, Printed And Sent To The Pc; Special Function: Reset Cp540 - TAG Heuer Chronoprinter 540 User Manual

IMPORTANT
The CP540 will accept multiple times of the same competitor N° at the start and at the
finish. The times taken into account in the ranking are the last one's recorded.
With each new start or finish, the proceeding times are automatically unassigned.
It's strongly recommended to identify or to cancel these times as soon as possible.
This action will simplify your timekeeping.
NOTE
This does not apply in the TRAINING MODE, whereby several runs for a competitor can be
memorised for later analysis.

7. Special characters memorized, printed and sent to the PC

–
+
=
C
#

8. Special function: RESET CP540

A general RESET
For this operation use a small unfolded paper clip or a needle.
WARNING
After a RESET, the memory is cleared and all parameters are restored.
To achieve a RESET, the CP540 batteries should have a good life or alternatively connect
the external power supply. The
TAG Heuer Timing
When a time is unassigned (false start, inter or finish)
Any time modified through a manipulation of start number
Any time inserted manually through INSERT TIME (Menu)
Any time repeated through DUPLICATE (Menu)
Any time cancelled through N° + R + 0 or after a DNF or DSQ
Any Start or Finish time of a forerunner (
can be achieved by pushing the mini switch located below the battery cover RESET.
RESET
+ N°)
is available with CP 540 ON or OFF.
Page 18 / 44