Table of Contents
Advertisement
3. Quick operation guide
The exceptional performance of Chronoprinter CP540 is guaranteed with its simplicity of use, the
hallmark of TAG Heuer timing philosophy
3.1.
Battery installation & replacement
To open the battery cover, use your thumbs to firmly push it in the direction of the arrow.
Insert the batteries, respecting the correct polarity, as indicated at the bottom of the compartment.
WARNING
To guarantee the security of your timekeeping, it is recommended to use your CP540 with
the internal batteries in a well-charged state, or with the Docking - BATT.
Always remove the batteries if you don't use your CP540 for several days.
If you forget to do this, the batteries could leak and seriously damage the device. The
warranty does not cover this problem.
The time of day, the date, the memorized runs and the selected parameters are saved by a
small internal battery.
3.2.
Switch the CP540 ON and Synchro
1) Press
ON
2) The LCD display will show
▬ ▬
a)
b)
c)
Date <DMA>
d)
Memory Available
e)
NET TIME
f)
ENTER THE MENU
TAG Heuer Timing
for 5 seconds
▬ ▬
14:24:59
14/11/2007
25000
F
LCD Screen
a) 4 black bars indicating that the
external Inputs are blocked (1 to 4).
The time of day is memorized in the
CP540 (internal or after a SYNCHRO).
b)
Symbol indicates you that the
power supply is connected
c) The date
d) The memory available
e) The Timing Mode used the last time
f)
How to enter the menu.
Page 5 / 44
Hide quick links:
Advertisement
Table of Contents
