Table of Contents
Advertisement
Backlite/Display
The Backlite/Display screen is used to set the backlight time-out and contrast.
Backlite Timeout is the time (in seconds) from the last button press to the backlight going out. The time-out can be set between
zero (0) and one hundred and twenty (120) seconds. Thirty (30) is the default setting. When set to zero (0), the backlight will remain
always on.
Contrast sets the contrast level of the LCD display. The contrast can be set between zero (0) and twenty (20). Ten (10) is the default
setting. If the display is too light, using a higher number. If dark lines appear in the display, use a lower number.
Adjust the Backlight
MENU
1.
Press the
User Settings
2.
Scroll to
Backlite/Display
3.
Scroll to
4.
Scroll to
Backlite
5.
Press the plus (
+) or minus (-) buttons to change the number of seconds.
The backlight time-out can be set between 0 and 120 seconds. Thirty (30) is the default setting. When set to Zero
Î
(0), the backlight will remain always on.
Adjust the Contrast
MENU
1.
Press the
User Settings
2.
Scroll to
3.
Scroll to
Backlite/Display
4.
Scroll to
Contrast.
5.
Press the plus (
+) or minus (-) buttons to change the contrast value.
Î
The contrast can be set between 0 and 20. Ten (10) is the default setting.
Backlite Timeout
Contrast
Done
button.
Select
and press the
Select
and press the
Timeout.
button.
Select
and press the
and press the
Select
Backlite/Display
60
10
+
-
button.
button.
button.
button.
26
Advertisement
Table of Contents
