Table of Contents
Advertisement
F/C Settings
The F/C Settings screen is use to select the temperature display mode. Fahrenheit (F) or Celsius (C) are the two available modes.
Change the Temperature Mode
1.
Press the
MENU
User Settings
2.
Scroll to
F/C Settings
3.
Scroll to
4.
Press the plus (
+) or minus (-) buttons to change the temperature mode. Select F for Fahrenheit or C for Celsius.
Sensor Calibration
The Sensor Calibration screen is used to change the temperature calibration of the internal temperature sensor. The temperature
calibration can be changed by +/- 7 degrees.
When the Sensor Calibration screen is selected, the current temperature calibration is displayed. In the example screen, the cali-
brated temperature is 77 and the number of degrees of offset being applied is 1.
Change the Sensor Calibration
MENU
1.
Press the
User Settings
2.
Scroll to
Sensor Calibration
3.
Scroll to
4.
Press the plus (
+) or minus (-) buttons to change the sensor calibration.
After this screen is closed, it may take a few seconds for the temperature displayed on the main thermostat
Î
screen to update to the new temperature.
F/C Mode
Done
button.
Select
and press the
Select
and press the
Done
button.
Select
and press the
and press the
F/C Settings
F
+
-
button.
button.
Sensor Calibration
Internal
(77)
1
+
-
button.
Select
button.
25
Advertisement
Table of Contents
