Table of Contents
Advertisement
Maint Service
The Maintenance Service screen shows the accumulated Heat and Cool Runtime hours as well as the Service Interval that will be
used to trigger a Maintenance Message. Any HEAT or COOL type of HVAC operation will cause the respective Runtime values to
increase.
When the combined HEAT and COOL Runtime hours equals the Service Interval hours, the Red LED will flash along with a
"Maint" message to remind you your HVAC system may require periodic maintenance. Press the
Service screen. The Reset button can be pressed and the HEAT and COOL Runtime values will be reset to zero.
Change the Maintenance Service Interval
MENU
1.
Press the
User Settings
2.
Scroll to
Maint Service
3.
Scroll to
4.
Press the plus (
+) or minus (-) buttons to adjust the service interval.
The service interval can be set between 200 and 4000 hours in 100 hour increments.
Î
Disable the Maintenance Service Interval
When the maintenance service interval is disabled, the runtime counter will continue to count the runtime, but the maintenance
service indicator will never be displayed.
1.
Press the
MENU
2.
Scroll to
User Settings
3.
Scroll to
Maint Service
4.
Press the minus (
Service Interval
Done
button.
Select
and press the
Select
and press the
button.
and press the
Select
and press the
Select
Disabled
-) button until
is displayed
Maintenance Service
Heat Runtime
200 HRS
Cool Runtime
300 HRS
3000 HRS
+
-
Reset
button.
button.
button.
button.
Menu
button to enter the Filter
23
Advertisement
Table of Contents
