Table of Contents
Advertisement
7.6 Installer Menu (Hob power settings)
When first connecting to the domestic power supply, the installer must set the power of
the hob cooking areas based on the actual abilities and capacity of the power supply
itself.
If this is not necessary, the hob can be turned on directly using
operations below to access the menu.
When the power is first turned on, the symbol
Continuing to hold
anticlockwise direction, starting from the one on the right.
A beep sounds each time you press, and when button
The Digit for the left rear cooking area will alternately show
The Digit for the left front cooking area will show
Press the Digit for the left rear cooking area and number 8 on the power bar to access the
settings menu. The operation is confirmed by the fact that the display changes from (
and
) to (
and
We are now in the hob power settings menu.
Press the Digit for the left front cooking area and select one of the values displayed in the
power bar (0-1-2-3) following the table provided below.
Once the correct value has been entered, confirm by pressing and holding
confirmation is received.
, press the 4 Digits for the cooking areas (
).
0
1
2
3
flashes.
) one at a time in an
is released it shows:
and .
.
Kw
7.4 Kw
4.5 Kw
3.5 Kw
2.8 Kw
, otherwise, follow the
until
39
Advertisement
Table of Contents
