Related Manuals for Smeg HOBD682D2
Summary of Contents for Smeg HOBD682D2
- Page 1 LIBRETTO DI USO USER MANUAL MANUEL D’UTILISATION GEBRAUCHSANLEITUNG GEBRUIKSAANWIJZING MANUAL DE USO LIVRO DE INSTRUÇÕES PARA UTILIZAÇÃO РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ HOBD682D2...
- Page 2 ..........................3 ..........................18 ..........................31 ..........................46 ..........................61 ..........................76 ..........................91 ..........................106...
-
Page 3: Safety Information
tracted before the earth wire if it 1. SAFETY INFORMATION comes loose. • The manufacturer cannot be For your own safety and held responsible for any dam- correct operation of the age resulting from incorrect or appliance, please read inadequate installation. this manual carefully be- fore installation and oper- •... - Page 4 prevent any exhaust back- • Cleaning and maintenance flow. When the cooking appli- must not be carried out by ance is used together with children, unless they are su- other appliances using non- pervised by an adult. electrical power sources, the •...
- Page 5 graph on Cleaning and main- • The appliance is not designed tenance. to be started using an external timer or a separate remote- • Always guarantee adequate controlled system. ventilation of the room when the appliance is used in con- WARNING: Danger of fire: do junction with other appliances not place objects on the cooking...
-
Page 6: Cleaning And Maintenance
2. USE • The suction hood has been designed solely to eliminate cooking fumes dur- ing domestic use. • Never use the appliance for purposes Regeneration procedure: other than those for which it has been • Wash in the dishwasher at a MAX designed. -
Page 7: Installation Requirements
• Remove encrusted dirt, for example hesives can cause deformation and milk that has overflowed during boil- detachment. ing, using a scraper pad suitable for • The kitchen unit must have sufficient vitreous ceramic, while the hob is still space to allow for electrical connec- hot. -
Page 8: Environmental Aspects
• The connection terminals can be ac- • If it is possible, always put the lids on cessed by removing the junction box the cookware. cover. • Place the pan on the hob before you • Check that the domestic power sup- switch it on. -
Page 9: Control Panel
Residual heat indicator 50°C or above, which may cause burns if touched with bare hands. The digit for The residual heat indicator is a safety the corresponding cooking area indic- feature, indicating that the surface of the cooking area is still at a temperature of ates 8. - Page 10 Value on KW Notes swipe key- board Once the correct value has been 7.4 Standard initial setting entered, confirm by pressing and hold- 10. HOB FUNCTIONS Lock It is possible to lock the hob functions during use, e.g. to clean the hob. To enable/disable: press “+”...
-
Page 11: Cooking Table
Pause function This function allows you to pause/restart any active function on the hob, by reducing the power available in the cooking zone and resetting all the functions. During the pause, all the digits indicate to inform the user that: - No energy is produced in any of the cooking areas. -
Page 12: Power Management Function
Prolonged cooking, braising Pasta, soups, braised meat Light frying Rösti (potato fry-ups), omelettes, breaded and fried foods, sausages Frying, deep fat frying Meat, chips Quick frying at high temperature Steak Quick heating Boiling water 12. SUCTION HOOD FUNCTIONS The controls for the cooking areas, suction hood and timer can be activated by pressing on the reference Digit. Suction power selection. - Page 13 that the current absorption of 16 A is not Cooking areas Pan base diameter exceeded. Ø min.(recommen- Ø max (recommen- ded) ded) In this case the generator detects the Combined left/right 190 mm 230 mm last command with the highest priority Single left/right 110 mm 190 mm...
-
Page 14: Troubleshooting
If the problem persists, call the After Sales Service and specify the error code that appears on the dis- play. 16. TECHNICAL DATA Please see the identification plate af- fixed to the bottom of the product. Product identification The manufacturer makes continual im- Type: 4300 provements products. this Model: HOBD682D2 reason, the text and illustrations in these... - Page 15 • Make sure that maintenance on elec- trical components is only carried out by the manufacturer or by the service technicians. MODEL HOBD682D2 • Make sure that damaged cables are Total maximum power (hob and 7.62 Kw (basic setting) only replaced by the manufacturer or hood) by the service technicians.