Using This Manual - aventon SINCH User Manual

USING THIS MANUAL

This manual contains details of the product, its equipment, and information on operation, maintenance, and
other helpful tips for owners. Read it carefully and familiarize yourself with the ebike before using it to
ensure safe use and prevent accidents. This manual contains many warnings and cautions concerning the
safe operation and consequences if proper setup, operation, and maintenance are not performed. All
information in this manual should be carefully reviewed and if you have any questions you should contact
Aventon immediately.
The notes, warnings, and cautions contained within the manual and paragraphs are marked by the triangular
Caution Symbol at the left side should be given special care. Users should also pay special attention to
information marked in this manual beginning with NOTICE.
Keep this manual, along with any other documents that were included with your bike, for future reference,
however all content in this manual is subject to change or withdrawal without notice. Visit https://www.aven-
the accuracy of its documentation and assumes no responsibility or liability if any errors or inaccuracies
appear within.
Because it is impossible to anticipate every situation or condition that will occur while riding, this manual
makes no representations about the safe use of bikes under all conditions. There are risks associated with
the use of any bike that cannot be predicted or avoided and are the sole responsibility of the rider.
GENERAL INFO
Assembly and Fit
Correct assembly and fit are essential elements to ensure your bicycling safety, performance, and comfort.
Even if you have the experience, skill, and tools to complete these essential steps before your first ride,
Aventon recommends having a certified, reputable bike mechanic to check your work.
NOTICE: If you do not have the experience, skill, and tools to complete assembly and fit, Aventon highly
recommends having a certified, reputable bike mechanic complete these procedures as well as any future
adjustments or tuning.
NOTICE: A critical aspect of assembling your bike is securing the front wheel and checking the tightness of
the rear wheel axle nuts. Aventon bikes use bolted on, through axle or quick release front wheel mounting
mechanism and the rear wheel is bolted on. These mechanisms may become loose or unsecured during
shipment or over time. The torque and security of all wheel mounting hardware should be inspected upon
arrival and on a regular basis. Both wheels need to be properly secured before operating your bike.
Mandatory Equipment and Use Locations
Before riding, ensure you have all required and recommended safety equipment and are following all laws
pertaining to use an electric bike in your region. For example, these laws may specify the need for
mandatory equipment, use of hand signals, and where you can ride.
Changing Components or Attaching Accessories
The use of non-original components or spare parts can jeopardize the safety of your ebike, void your
warranty and, in some cases, cause your ebike to not conform with laws pertaining to your bike.
02