aventon SINCH User Manual page 10

ASSEMBLY
NOTICE: The following steps are only a general guide to assist in the assembly of your ebike and are
not a complete or comprehensive manual of all aspects of assembly, maintenance, and repair. Consult
a certified, reputable bike mechanic to assist with assembly, repair, and maintenance of your ebike.
Step 1. Unfold the rear wheel/section and keep your eBike upright with kickstand. Turn the latch into the
"closed" position,, make sure the hook end of the latch is secure and make sure you cannot open the latch
without disengaging the latch safety lock.
1
Step 2. –Pull the stem upright and fold the latch up to close it.
Step 3. Stand in front of the bike and clamp front wheel between both legs, verify the handle bars are straight
and in line with the front wheel. Make sure the pinch bolts are tight and your cannot turn the stem freely
from the front wheel. Sit on the saddle, adjust the handlebar to comfortable angle, and close the handlebar
2
09