Unpack And Set Up - Silvercrest STV 45 C2 Operating Instructions Manual

RP96066 Tower-Ventilator LB2 Seite 30 Donnerstag, 10. Oktober 2013 10:48 10
4.4 Protection against injury
Warning! To avoid injury, please
observe the following information.
• Ensure that it is not possible for anyone
to trip over or to get caught up in or step
on the mainscable.
4.5 For the safety of your child
Warning! Children often cannot
assess dangers correctly and are
injured as a result. Please therefore
observe the following:
5.1 Assemble appliance
Before the appliance can be started up,
stand 8 needs to be screwed on.
1. Take the appliance
packaging.
2. Remove the transport packaging.
3. Check that the appliance has not
sustained any damage.
4. Put rear half of the stand 10 and front
half of the stand 11 together.
Note You can recognize rear half of the
stand 10 by the depression for power
supply cable 9.
5. Use screw ring 12 supplied to screw
stand 8 to the underside of the tower
fan.
Notes
– On delivery, screw ring 12 is screwed
onto the bottom of the tower fan.
– Ensure that power supply cable 9 is
located in the depression provided for it.
30
• This product may only be used under
adult supervision to ensure that children
do not play with the appliance.
• Always take care to ensure the
appliance is kept out of the reach of
children at all times.
• Ensure that the packing foil does not
become a deadly trap for a child.
Packing foils are not toys.

5. Unpack and set up

– Tighten screw ring 12 hand-tight. Do
not use a tool.
out of the
6. Select a location in line with the safety
instructions (see "4. Safety instructions"
on page 28).
7. Plug the power plug into a power supply
socket which meets the technical data
requirements.