Technical Data; Safety Instructions - Silvercrest STV 45 C2 Operating Instructions Manual

RP96066 Tower-Ventilator LB2 Seite 28 Donnerstag, 10. Oktober 2013 10:48 10
Power supply:
Maximum power:
Protection class:
Description
Maximum fan flow rate
Fan power input
Service value
Standby power consumption
Fan sound power level
Maximum air velocity
Measurement standard for service value
4.1 Terms used
The following signalling terms are found in
these Operating Instructions:
Warning!
High risk.
warning may cause injury to life
and limb.
Caution!
Medium risk. Disregarding the warning may
cause damage to property.
Note:
Low risk. Circumstances that should be taken
into account when dealing with this
appliance.
4.2 General information
• Before using the appliance, be sure to
read these Operating
carefully. They are a component part of
the appliance and must be available at
all times.
28

3. Technical data

220 - 240 V / 50/60 Hz
~
45 watts
I I
Symbol
F 16,98 m
P 38,9
SV 0,44
Psb 0
Lwa 55
c 2,17
IEC 60879:1986+(corr.1992)

4. Safety instructions

• Use the appliance only for the purpose
• Check whether the mains voltage (see
Disregarding the
• This device is not intended to be used by
• If there should be any malfunctions, the
Instructions
Value Unit
3
/min
W
3
(m /min)/W
W
dB(A)
m/s
described (see "1.1 Intended purpose"
on page 27).
type plate on the appliance) agrees with
your mains voltage.
individuals (including children) with
limited physical, sensory or mental
capabilities or with a lack of experience
and/or lack of knowledge, unless
supervised by a person responsible for
their safety or they have received
instructions from such a person as to
how to use the device. Children should
always be supervised to ensure that they
do not play with the device.
appliance may only be repaired by our
Service Centre. The contact data can be
found in "Service Centre" on page 34.