Recorder Connection - Panasonic WJ-SX 150A Operating Instructions Manual

Connection between the Units and Cameras
Connect each camera to CAMERA IN 1 to 16 of each unit. (Refer to p. 36 Connection with the Camera Sites.) Each camera has
its own logical camera number.
The default setting of the logical camera numbers is as follows. (The logical camera numbers can be configured in SETUP
MENU and WJ-SX150A Administrator Console.)
Camera total
number
1 to 16
17 to 28
29 to 40
41 to 52
53 to 64
Connect the cameras and the Master/Slave 1 to 4 with the coaxial cables according to the diagram.

Recorder Connection

Connect recorders to each Master/Slave units. Refer to pp. 40 to 47 for connection procedures.
Example: Master, Slave 1 and 2 are connected in the system.
Camera
Master unit
IN
OUT
Master recorder
IN
OUT
Notes:
• Recorders and/or the Multiplexer board cannot be connected to the Master unit when Slave 1 to 4 are connected in the
system.
• The Master unit's camera channels which loop thru Slave units cannot be connected to the recorder. (In the illustration, the
Master unit's CAM OUT 1 to 8 and the recorder's VIDEO IN 1 to 8 cannot be connected.) The Master recorder can record
only images from directly-connected cameras when the Master and Slave 1/2/3 are connected together. (For example in
the illustration, the Master recorder can record images from Cam 33 to 40.) Camera input signals from Slave units to the
Master unit are not for recording but for cross point switching.
54
Cameras connected Cameras connected
to Master to Slave 1
1 to 16
17 to 28 1 to 16
33 to 40 1 to 16
49 to 52 1 to 16
– 1 to 16
40 39 38 37 36
16 15 14 13 12
16 15 14 13 12
16 15 14 13 12
16 15 14 13 12
Cameras connected
to Slave 2
– –
–
17 to 32
17 to 32
17 to 32
35 34 33
Connected to Slave 2
11 10 9 8 7
11 10 9 8 7
CAMERA
11 10 9 8 7
11 10 9 8 7
VIDEO
Cameras connected Cameras connected
to Slave 3 to Slave 4
–
–
–
33 to 48
33 to 48 49 to 64
Connected to Slave 1
6 5 4 3 2
6 5 4 3 2
6 5 4 3 2
6 5 4 3 2
–
–
–
–
1
1
1
1