Panasonic WJ-SX 150A Operating Instructions Manual page 114

Alarm History Table
There are 100 alarm records stored in chronological order
in 10 pages of tables.
1. Select the desired monitor. (Refer to p. 106 Monitor
Selection.)
2. Press the button 7 while holding down the OSD button.
"OSD" will appear on the LED display, and the ALARM
HISTORY table will appear on the active monitor as
shown in the figure.
NO YYYY/MM/DD HH:MM:SS
016 2002/08/21 18:59:08
015 2002/08/21 18:58:08
014 2002/08/21 18:57:08
013 2002/08/21 18:55:08
012 2002/08/21 18:54:08
011 2002/08/21 18:53:08
010 2002/08/21 18:53:00
009 2002/08/21 18:52:08
008 2002/08/21 18:51:08
007 2002/08/21 18:50:08
F1 ACK
CAM SETUP SUSPEND
F2 GROUP SEQ
INDEX
PREV
RECORDER
STOP
STOP PLAY
OSD
SETUP
The columns in the table indicate the states as follows:
DATE: Lists the date and time when the alarm state
changes.
ALARM: Lists the alarm number (01 - 99).
EVENT: Lists the event when the alarm state changes.
3. Press the NEXT button to select the next page of the
history, and press the PREV button to back up to the
previous page.
4. To exit from the mode, press the CLEAR button.
117
ALARM HISTORY 1 of 2
ALARM EVENT
80 ALARM
80 ACK
80 RESET
07 ALARM
07 ACK
07 RESET
09 ALARM
09 RESET
06 ALARM
06 ACK
RESET
ALL RESET
TOUR SEQ
T&D CAM ID EVENT
REW/FF AUX1 OFF AUX1 ON
STILL
NEXT
MON STATUS ALL
AUX2 OFF AUX2 ON
STEP EL-ZOOM
PAUSE
ALM H VLD H SYS S
SEQUENCE DEF OFF DEF ON
PAUSE
MON (ESC) CAM (SET)
SHIFT MON LOCK MULTI SCREEN SEL WIPER
Video Loss History Table
There are 100 video loss detection records stored in
chronological order in 10 pages of table.
1. Select the desired monitor. (Refer to p. 106 Monitor
Selection.)
2. Press the button 8 while holding down the OSD button.
"OSD" will appear on the LED display, and the VIDEO
LOSS HISTORY table will appear on the active monitor
as shown in the figure below.
NO
012 2002/08/21 18:59:08
011 2002/08/21 18:58:08
010 2002/08/21 18:57:08
009 2002/08/21 18:55:08
008 2002/08/21 18:54:08
007 2002/08/21 18:53:08
006 2002/08/21 18:53:00
005 2002/08/21 18:52:08
004 2002/08/21 18:51:08
003 2002/08/21 18:50:08
F1
CAM SETUP
CALL
PRESET
F2
PROGRAM
PRESET INDEX
AUTO PAN
RECORDER
STOP
CAM FUNC
STOP
CLEAR
LOG OUT
SETUP
The columns in the table indicate the states as follows:
DATE:
CH:
EVENT: Lists the event when the video loss state
VIDEO LOSS HISTORY
YYYY/MM/DD HH:MM:SS CH EVENT
99 VIDEO RECOVER
14 VIDEO RECOVER
99 VIDEO LOSS
07 VIDEO LOSS
R0 SW RECOVER
16 VIDEO LOSS
09 VIDEO LOSS
R0 SW LOSS
S1 SLAVE DOWN
S1 SLAVE RECOVER
ACK RESET
SUSPEND ALL RESET
GROUP SEQ TOUR SEQ
T&D CAM ID
AUX1 OFF
REW/FF STILL
PREV NEXT
MON STATUS ALL
AUX2 OFF
STEP EL-ZOOM
PAUSE
ALM H VLD H
DEF OFF
PLAY PAUSE SEQUENCE
MON (ESC)
OSD
SHIFT MON LOCK
MULTI SCREEN SEL
Lists the date and time when the video loss
state changes.
Lists logical camera number, slave unit num-
ber or recorder number that is connected to
the system.
changes.
1 of 2
CALL
PRESET
EVENT
AUX1 ON PROGRAM
PRESET
AUTO PAN
AUX2 ON
SYS S
CAM FUNC
DEF ON
CAM (SET)
CLEAR
LOG OUT
WIPER