Panasonic WJ-SX 150A Operating Instructions Manual page 116

Resetting the Alarm Inputs
There are two alarm reset functions:
• Alarm reset (resetting the alarm inputs per monitor)
• Alarm all reset (resetting all the alarm inputs)
Alarm Reset
RESET
ALL RESET
TOUR SEQ
1. Select a monitor which displays "ALARM".
2. To reset the alarms, press the RESET button.
"ALARMnn" will disappear from the selected moni-
tor.
When alarms have been reset from all the monitors,
the LED display and indicators of system controllers
will work as follows for recovery.
• The LED display will return to the state before
the alarm input.
• The alarm indicator will go out.
• The CAM indicator will return to the state before
the alarm input.
Note: When more than one alarm is input and they are
associated with the same monitor, they cannot be reset
one by one.
Alarm All Reset
1. Press the RESET button while holding down the SHIFT
button.
RESET
ALL RESET
TOUR SEQ
NEXT
PAUSE
PAUSE
SHIFT
2. The monitor, the LED display and the indicator will
change as follows:
"ALARMnn" will disappear from all the monitor.
The LED display will return to the state before the
alarm input.
The alarm indicator will go out.
The CAM indicator will return to the state before the
alarm input.
119
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
T&D CAM ID EVENT
AUX1 OFF AUX1 ON
STILL
MON STATUS ALL
AUX2 OFF AUX2 ON
EL-ZOOM
ALM H VLD H SYS S
DEF OFF DEF ON
SEQUENCE
MON (ESC) CAM (SET)
MON LOCK WIPER
MULTI SCREEN SEL
Suspending the Alarm Inputs
Use this function when you do not want to be disturbed by
an alarm input, for example, during the setup procedures.
ACK RESET
SUSPEND ALL RESET
GROUP SEQ TOUR SEQ
T&D CAM
AUX1 O
REW/FF STILL
PREV NEXT ALM SUSPENDED
MON STATUS ALL
AUX2 O
STEP EL-ZOOM
PAUSE
ALM H VLD
DEF O
PLAY PAUSE SEQUENCE
MON (ESC)
OSD
MON LOCK
SHIFT MULTI SCRE
1. Press the ACK/SUSPEND button while holding down
the SHIFT button.
"ALM SUSPENDED" will appear on the monitor.
2. To cancel alarm suspension, press the ACK/SUSPEND
button while holding down the SHIFT button again.
"ALM SUSPENDED" will disappear from the monitor.
Notes:
• An alarm continues to operate even after it is suspend-
ed.
• If you suspend an alarm while an alarm image is dis-
played, "ALM SUSPENDED" will not appear on the moni-
tor. Reset the alarm, and then suspend it again.