Paging The Parent Unit - Philips AVENT SCD525 Manual

2 Press the volume + or – button on the parent unit until the desired loudspeaker volume for
the parent unit has been reached (Fig. 22).
The display gives visual feedback on the volume settings of the parent unit: (Fig. 23)
,
- Volume switched off/silent baby monitoring
- Minimum volume
- Maximum volume
Note: If the volume is set to a high level, the units consume more power.
You can use the TALK button on the parent unit to talk to your baby (e.g. to comfort your baby).
1 Press and hold the TALK button and talk clearly into the microphone from a distance of
15-30cm (Fig. 24).
,
2
The parent unit continuously monitors the sound level in your baby´s room and the sound level
lights let you know if there is any activity. If your baby cries, you see the sound level lights light up on
the parent unit.
- As long as the baby unit does not detect a sound, all sound level lights on the parent unit are
out.
- When the baby unit picks up a sound, one or more sound level lights on the parent unit go on.
The number of lights that go on is related to the loudness of the sound picked up by the baby
unit.
Nightlight
Note: You can also switch the nightlight on and off in the menu of the parent unit (see chapter 'Menu
options', section 'Nightlight').
Press the nightlight button Q on the baby unit to switch on the nightlight. (Fig. 25)
1
Q appears on the display of the parent unit.
,
Press the nightlight button Q again to switch off the nightlight.
2
, The nightlight dims gradually before it goes out completely.
, Q disappears from the display of the parent unit.
saves power.

Paging the parent unit

If you have misplaced the parent unit and its volume is switched off, you can use the PAGE button
on the baby unit to locate the parent unit.
1 Press the PAGE button on the baby unit (Fig. 26).
,
The parent unit produces a paging alert tone.
,
2 To stop the paging alert tone, press the PAGE button again or press any button on the parent
unit.
ENGLISH
11