Paging The Parent Unit; Battery Status Light; Functions And Feedback On The Parent Unit; Soothing Menu - Philips AVENT SCD730 Manual

English
10

Paging the parent unit

Battery status light

Functions and feedback on the parent unit

Soothing menu

1 Press the projector on/off button to switch on the projector. The
projector symbol appears on the display of the parent unit.
2 There are six different patterns. The first pattern fades in to full intensity
in 2 seconds. It is projected for 8 seconds and then fades out for 2
seconds while the next pattern fades in. Each pattern is projected for 10
seconds. The patterns are repeated for the set time.
3 To switch off the projector, press the projector on/off button again.
If you have lost the parent unit, you can use the FIND button on the baby
unit to locate the parent unit. This function only works when the parent unit
is switched on.
1 Press FIND on the baby unit. The parent unit produces a paging alert
tone.
2 To stop the paging alert tone, press FIND on the baby unit again or press
any button on the parent unit. The paging alert tone stops automatically
after 2 minutes.
1 The battery status light is solid green when the baby unit is operating on
battery power and the batteries contain enough energy.
2 The battery status light flashes red quickly when the batteries run low
while the baby unit is operating on battery power. Replace the batteries
when they run low.
The parent unit has a separate soothing menu for all soothing features:
nightlight, lullaby and projector. To open the soothing menu, press the