Table of Contents
Advertisement
Paging the parent unit
Battery status light
Functions and feedback on the parent unit
Volume
If you have lost the parent unit, you can use the FIND button on the baby
unit to locate the parent unit This function only works when the parent
unit is switched on and within range
1 Press FIND on the baby unit The parent unit produces a paging alert
tone
2 To stop the paging alert tone, press FIND on the baby unit again or
press any button on the parent unit The paging alert tone stops
automatically after 2 minutes
1 The battery status light is solid green when the baby unit is operating
on battery power and the batteries contain enough energy
2 The battery status light flashes red quickly when the batteries run
low while the baby unit is operating on battery power Replace the
batteries when they run low
The volume can be set if the menu is not active There are seven volume
levels and a 'volume off' setting.
Setting the volume level
1 Press the + button or the - button once
The current volume level appears on the display
2 Press the + button to increase the volume or press the - button to
decrease the volume
If no button is pressed for more than 2 seconds, the volume level
indication disappears from the display and the volume setting is saved
Volume off
Below the lowest volume setting, there is a ‚volume off' setting.
1 Press the + button or the - button once
The current volume level appears on the display
2 Press and hold the - button for more than 2 seconds to set the volume
to off.
The message ‚MUTE' and the mute symbol appear on the display. Only
the sound level lights show that the baby produces sounds
- 7 -
Advertisement
Table of Contents
