Paging The Parent Unit; Lullaby Function - Philips AVENT SCD535/60 Manual

EngliSh
12
1 Press the nightlight button Qon the baby unit to switch on the nightlight. (Fig. 26)
Q appears on the display of the parent unit.
,
2 Press the nightlight button Qagain to switch off the nightlight.
The nightlight dims gradually before it goes out completely.
,
Qdisappears from the display of the parent unit.
,
Tip: Switch off the nightlight when you operate the baby unit on non-rechargeable batteries. This saves
power.

paging the parent unit

If you have misplaced the parent unit, you can use the PAGE button on the baby unit to locate the
parent unit.
Note: The paging function only works when the parent unit is switched on.
1 Press the PAGE button on the baby unit (Fig. 27).
The message 'Paging' and the paging symbol appear on the displays of the baby unit
,
and parent unit.
The parent unit produces a paging alert tone.
,
2 To stop the paging alert tone, press the PAGE button again or press any button on the parent
unit.

lullaby function

Note: You can also operate the lullaby function in the menu of the parent unit (see chapter 'Menu
options', section 'Lullaby function').
1 Press the play/stop button Eon the baby unit to play the currently selected lullaby. (Fig. 28)
2 To select another lullaby, press the lullaby button Kon the baby unit within 2 seconds to
toggle through the list of lullabies. (Fig. 29)
Note: If you do not press the lullaby button Kfor more than 2 seconds, the lullaby shown on the display
starts to play.
The number of the lullaby appears on the display together with the lullaby symbol K.
,
The selected lullaby is repeated 5 times in a row.
,
When you select 'play all', all 5 lullabies are played once.
,
3 To stop the lullaby, press the play/stop button E on the baby unit again. (Fig. 28)
4 To select another lullaby when a lullaby is playing:
- Press the lullaby button K on the baby unit within 2 seconds to toggle through the list of
lullabies.
Note: If you do not press the lullaby button Kfor more than 2 seconds, the lullaby shown on the display
starts to play.
humidity
When there is a connection between the baby unit and the parent unit, the humidity level is shown
on the display of both units.
The optimal humidity level is between 40% and 60%. It is very important to maintain the correct
humidity level as it helps to protect your baby from irritation of the mucous membranes, dry and
itchy skin, chapped lips and a dry, sore throat. When the mucous membranes do not function
optimally, they cannot give your baby full protection from all kinds of germs. This increases the
chance of your baby catching a cold or the flu, and reduces its resistance to infections from mould
and bacteria.