S+S Regeltechnik RYMASKON 700 Series Operating Instructions Manual page 29

Operating instructions
RYMASKON ® 700 - BACnet
®
RYMASKON 700 - Modbus
RYMASKON 700 Series | Parameter Table | Status: 04.04.2022 (EN)
SYSTEM
Parameter name
Address
Baud rate
Parity
Stop Bits
Device ID
Service-Pin
Maintenance Code
Staff Code
Language
Show Language Swap
Screen Refresh-Rate
Native Units (defaults)
°C/°F presetting
Reload Defaults
Version
S+S REGELTECHNIK GMBH | THURN-UND -TA XIS - STR. 22 | D -90411 NÜRNBERG | GERMANY | FON +49 ( 0 ) 911 51947- 0 | w w w.S p lusS.de
Description
Setting of bus address for Modbus devices
Setting of MAC address for BACnet devices
Baud rate for Modbus or BACnet devices
Parity for Modbus or BACnet devices
Odd: odd
Even: even
Stop bits for Modbus or BACnet devices
Device ID (for BACnet devices only)
(0: Auto)
BACnet service pin (only for BACnet devices, if
active the controller transmits a BACnet
'I-am' notification)
PIN for setting mode
(0000: no PIN required)
PIN for access to secondary screen
(0000: no PIN required)
Available languages for the user interface
(Main screen)
Display of switching icon (code) for selecting the
operating language on the main screen
Refresh rate of the LCD touch screen
Default value of temperature displays in degrees
Celsius or degrees Fahrenheit
NOTE: Change leads to reloading of the
default values
Reload factory settings (defaults)
Software version
29
Area
Modbus: 0...247 (default 1)
BACnet: 0...127 (default 1)
0 = 9600 (default)
1 = 19200
2 = 38400
3 = 57600
4 = 76800
5 = 115200
0 = None (default)
1 = Odd
2 = Even
0 = 1 Stop-Bit (Default)
1 = 2 Stop-Bits
0...4.194.303 (Default 0 = Auto = 651.001)
0 = Disabled (Default)
1 = Enabled
0000...9999 (default 6666)
0000...9999 (default 0000)
0 = DE (Default)
1 = EN
2 = FR
3 = ES
4 = IT
0 = Disabled (Default)
1 = Enabled
0 = Fast
1 = Medium
2 = Slow (Default)
C = Celsius (default)
F = Fahrenheit
0 = Off (Default)
1 = On
x.xx (BACnet/Modbus)