Setpoint Temperature - S+S Regeltechnik RYMASKON 700 Series Operating Instructions Manual

Operating instructions
RYMASKON ® 700 - BACnet
®
RYMASKON 700 - Modbus
SETPOINT
TEMPERATURE
Display options and
setpoint adaptation
S+S REGELTECHNIK GMBH | THURN-UND -TA XIS - STR. 22 | D -90411 NÜRNBERG | GERMANY | FON +49 ( 0 ) 911 51947- 0 | w w w.S p lusS.de
The large setpoint ring of the main screen in the unit shows the setpoint temperature with a
default setting in degrees Celsius or Fahrenheit.
The display can be changed so that the setpoint value that is relevant for controlling the output
power is displayed as a percentage.
Setpoint Mode:
• Temperature (Fig. 3a)
setpoint temperature display in °C or °F
• Percent (Fig. 3b)
setpoint display in percent
• None (Fig. 3c)
Instead of the setpoint temperature, the circle displays the measured value of sensor 3.
If no other measured value is displayed in the action circle, the gearwheel icon for making
settings appears instead of the action circle as an indication to call up the secondary screen.
• Relative (Fig. 3d)
Display of the relative target temperature adjustment (+/–)
NOTE: The Setpoint Limit Mode must also be set to 'Relative' under Control Settings.
• State Select (Fig. 3e/3f)
Changing the setpoint in whole numbers,
display of 'Min.' or 'Max.' when the minimum or maximum value is reached
Target Setpoint
The user can use the UP and DOWN arrow keys to adjust the setpoint.
The upper and lower thresholds can be adjusted in the settings.
The current setpoint can be accessed via the bus.
18
°C
.
5
Room
22
°C
.7
Fig. 3a Temperature display
2
°C
+
.
5
Room
22
°C
.7
Fig. 3d Display relative
10
25
%
.
0
Room
22
°C
.7
Fig. 3b Display percent
0
Min
Fig. 3e Mode State Select Min.
Room
18
°C
.
3
Fig. 3c No display
7
Max
Fig. 3f Mode State Select Max.