S+S Regeltechnik RYMASKON 700 Series Operating Instructions Manual page 27

Operating instructions
RYMASKON ® 700 - BACnet
®
RYMASKON 700 - Modbus
RYMASKON 700 Series | Parameter Table | Status: 04.04.2022 (EN)
DISPLAY
Parameter name
Brightness
Enable Function 1
Enable Function 2
Fan Speed Display
Blind 1 Mode
Blind 1 Configuration
Blind 2 Mode
Blind 2 Configuration
S+S REGELTECHNIK GMBH | THURN-UND -TA XIS - STR. 22 | D -90411 NÜRNBERG | GERMANY | FON +49 ( 0 ) 911 51947- 0 | w w w.S p lusS.de
Description
Display lighting in standby
Enable of icon for A/C (air conditioning) or blind
1 and the relevant variables for manual control
via the bus.
If blind 1 has been selected, blind 1 mode must
be adapted/monitored at the same time.
Enable of the icon for lights or blind 2 and the
relevant variables for manual control via the
bus.
If blind 2 has been selected, blind 2 mode must
be adapted/monitored at the same time.
Enable of the fan icon and/or the fan speeds
(Bar) and the relevant variables for manual
control via the bus.
NOTE: For parameters 1-5 the number of fan
speeds must be set (Operating Modes,
Fan Manual Control)
Setting of the step width for blind 1 when
pressing the arrow keys on the screen.
(1) On/Off: 0, 100 %
(2) 4 steps: 0, 25, 50, 75, 100 %
(3) 10 steps: 0, 10, 20, ..., 100 %
(4) infinite: 0, 1, 2, 3, ..., 100 %
Parameter 4 activates an automatic system
which automatically changes the value using a
long keypress (see description "Blind Control")
Enable of graphical display of movement type of
the blind and the relevant variables for manual
control via the bus.
(0) Level: translatory movement, UP/DOWN
(1) Tilt: rotatory movement, rotation
(2) Level + Tilt
Setting of the step width for blind 1 when
pressing the arrow keys on the screen.
(1) On/Off: 0, 100 %
(2) 4 steps: 0, 25, 50, 75, 100 %
(3) 10 steps: 0, 10, 20, ..., 100 %
(4) infinite: 0, 1, 2, 3, ..., 100 %
Parameter 4 activates an automatic system
which automatically changes the value using a
long keypress (see description "Blind Control")
Enable of graphical display of movement type of
the blind and the relevant variables for manual
control via the bus.
(0) Level: translatory movement, UP/DOWN
(1) Tilt: rotatory movement, rotation
(2) Level + Tilt
27
Area
0...20 (default 5)
0 = Disabled (Default)
1 = A/C
2 = Blind 1
0 = disabled (Default)
1 = Lights
2 = Blind 2
0 = Disabled (Default)
1 = Bar & Fan
2 = Bar
3 = Fan
4 = Coloured Bar & Fan
5 = Coloured Bar
1 = On/Off
2 = 4 steps
3 = 10 steps
4 = infinite
0 = Level
1 = Tilt
2 = Level + Tilt
1 = On/Off
2 = 4 steps
3 = 10 steps
4 = infinite
0 = Level
1 = Tilt
2 = Level + Tilt