Eco Mode - S+S Regeltechnik RYMASKON 700 Series Operating Instructions Manual

Operating instructions
RYMASKON ® 700 - BACnet
®
RYMASKON 700 - Modbus

ECO MODE

Display and setting
of the ECO Mode
FROST MODE
Displaying Frost
Mode
S+S REGELTECHNIK GMBH | THURN-UND -TA XIS - STR. 22 | D -90411 NÜRNBERG | GERMANY | FON +49 ( 0 ) 911 51947- 0 | w w w.S p lusS.de
The unit can be switched to ECO Mode via the bus or the
digital input. The ECO icon is shown in the display (if enabled).
Tap on the Eco icon in the main screen to abort ECO Mode.
The last command applies, i.e. if the controller was switched
to ECO via the bus or the digital input, the user can cancel the
mode by tapping the ECO icon.
NOTE:
The display of the ECO icon can be deactivated in the settings
(Display - Disable ECO button). When deactivated, the mode
cannot be cancelled by the user.
The FROST PROTECTION icon can be activated via the bus,
to display Frost Mode (defrosting).
21
16
°C
.
5
Room
20
°C
.1
Fig.11
ECO ICON
(mode active)
TAPPING THE ICON
CANCELS THE MODE
Target
21
°C
.
5
A
Room
20
°C
.1
Fig.12
FROST PROTECTION
(Mode active)
THE MODE MUST BE
ACTIVATED VIA THE BUS