Charge The Battery; Charging Status Check - decon Flexlife D9 User Manual

CHARGE THE BATTERY

•
Use available standard ac current (AC 110-220 V, 50-60 Hz) for charging, the charging port is located
on the front of the joystick/control panel.
•
Make sure the power on the wheelchair is turned off before charging.
•
Insert the charging plug on the charger into the charging port. Or charge the battery directly with the
supplied adapter.
•
Insert the other cable into the charger into the power outlet. If the red indicator is lit, it indicates
that it is charging.
•
After the charging indicator has changed from red to green, continue charging for 30 minutes to
ensure full charging. First unplug the external power supply on the charger, and then unplug the
control panel.
Laddport joystick

CHARGING STATUS CHECK

•
Each battery can be checked separately to ensure charging status.
•
Press the blue button on the front of the battery and read the LEDs. They represent 20%, 40%, 60%,
80% and 100% charge.
Flexlife User Manual D9 - ENG
2020-03
Revision 2
Charging through joystick Separate battery charge in
wheelchair, using the
included adapter.
Battery connected to
charger with the included
adapter.
30