Fig 5a
FOLD UP
Step:
•
Hold with one hand the backrest of the chair and the other hand grabs the battery tube or the front edge
of the seat.
•
Push back the backrest as far possible, and make sure that the locking latch on the back snaps
•
Place the seat cushion on and possibly lower the footplate (depending on the technique of moving to the
chair).
•
Install the control panel /joystick (see the installation control page).
•
If they are unfitted, install the anti-tipper guards.
FOLD UP AND DOWN THE ARMRESTS
•
On each armrest outside there is a lever that can be turned to loosen and lock the armrests in the lowered
or raised position.
Flexlife User Manual D9 - ENG
2020-03
Revision 2
fig 5b
Fig 6
19