www.intertec.info Table of contents 1 General .................................. 3 2 Use ................................... 3 3 Explanation of symbols for warnings and signal words .................. 3 4 Safety information .............................. 3 5 Installation accessories ............................ 3 6 Technical Data ................................ 4 7 Installation................................ 4 8 Connection................................
Operating Instructions CP MULTITHERM DE.A HI General WARNING These operating instructions describe the safe and proper way to work with the device. The safety informa- WARNING tion and instructions given as well as the local accident This sign is warning about a hazardous situation which,...
Operating Instructions CP MULTITHERM DE.A HI The following are included in the scope of delivery: Connecting cable AM Silicone hose cable, notch- and oil resistant, 3 For heating with profile depth "N": x 1,0 mm² Ø8,5 mm Piece Description...
Operating Instructions CP MULTITHERM DE.A HI Additional equipotential bonding is required. The ter- minal block designated for this purpose has the ground sign. ATTENTION: Never remove the adapter/ cable gland! Illustration 2: Example heater with KLE connection CAUTION NOTICE: Do not remove adapter/ cable connec-...
Operating Instructions CP MULTITHERM DE.A HI Repairs may only be carried out by the manufacturer in the factory. All components have to be kept clean and free of dust and harmful substances that could lead to excessive Ground temperature rise.
Page 7
Operating Instructions CP MULTITHERM DE.A HI • Sort other components according to their material properties and dispose of them. NOTICE Environmental damage may be caused if dis- Dipl.-Ing. Martin Hess, Managing Director posed of incorrectly! Electrical scrap and electronics components are subject...