www.intertec.info Table of contents 1 General .................................. 3 2 Use ................................... 3 3 Special conditions for safe use.......................... 3 4 Explanation of symbols for warnings and signal words .................. 3 5 Safety information .............................. 4 6 Installation accessories ............................ 4 7 Technical Data ................................
Operating Instructions CP MICROTHERM DC.A General GB 50257-2014: Code for construction and acceptance of electric equipment on fire and explosion hazard elec- These operating instructions describe the safe and trical equipment installation engineering proper way to work with the device. The safety informa- GB 12476.2-2010: Electrical apparatus for use in the...
Operating Instructions CP MICROTHERM DC.A Piece Description CAUTION T-head bolt type 28/15, M 6x15 M6 flat square nut NOTICE Washer shape A 6.4 This sign is warning about a hazardous situation which, Lock washers shape J 6.4 if not heeded, may lead to slight, reversible injury.
Operating Instructions CP MICROTHERM DC.A Temperature class Thermostat Rated output Rated voltage/Operating voltage Illustration 1: Example: CP MICROTHERM DCNA 50 T3 TS10 label Installation NOTICE Carefully remove When removing from the packaging and during trans- port, the connection line must not be stressed or bent.
Operating Instructions CP MICROTHERM DC.A Terminal box ATTENTION: Never remove the adapter/ cable gland! Illustration 3: Example heater with KLE connection CAUTION NOTICE: Do not remove adapter/ cable connec- tion to connect up the heater! This would cause irreversible damage to the heater and this would mean that the explosion protection can no longer be warranted.
Operating Instructions CP MICROTHERM DC.A Repairs may only be carried out by the manufacturer in • Sort other components according to their material the factory. properties and dispose of them. All components have to be kept clean and free of dust...
Operating Instructions CP MICROTHERM DC.A The legally defined warranties and warranty periods of Further information and service 24 months are applicable to our scope of supply and ser- If the information contained in this instruction manual vices. should not be sufficient in any way, then INTERTEC...