Table of Contents
Advertisement
1 Introduction
2 Associated documentation
User's manual
This manual describes how to use and install the Planmeca ProSensor HD
sensor that is intended to be used for capturing digital intraoral X-ray images
from patient's jaw, teeth, gums, roots and root canals by trained dental care
professionals.
Please read this manual carefully before using the system.
Planmeca ProSensor automatically triggers and captures images to the start
and end of the x-ray radiation so that any intraoral x-ray unit supporting
exposure times and cones listed In chapter "Selecting exposure values" on
page 8 can be used.
The Planmeca Romexis imaging software or third party software stating
compatibility with Planmeca ProSensor or software stating compatibility
through TWAIN can be used for image capturing.
Planmeca ProSensor is connected to a computer using Ethernet or USB
interface and it supports Windows and MAC operating systems, see details
in section "Technical specifications" on page 20.
This manual is valid for following software versions:
•
Planmeca ProSensor Ethernet software version 2.5.0.R or later
•
Planmeca ProSensor USB software version 2.5.1.R or later
•
Didapi software version 5.3.3.R or later. The high resolution option for
size 0 sensor requires version 5.5.1.R or later.
This manual should be used in conjunction with following manuals:
•
Planmeca ProX for veterinary use user's manual
•
Planmeca ProX installation manual
•
Planmeca ProX technical manual
•
Planmeca ProSensor HD installation manual
•
Planmeca ProSensor HD technical manual
These manuals are intended to be used in conjunction with the
documentation for the Planmeca Romexis imaging software. The imaging
software package contains the following manuals:
•
Planmeca Romexis user's manual
•
Planmeca Romexis technical manual
1 Introduction
Planmeca ProSensor® HD
1
Advertisement
Table of Contents
