Advertisement
Quick Links
WARNING:
Read the ENTIRE operator's manual to become familiar with the
features of the product before operating.
Failure to operate the product correctly can result in damage to
the product, personal property and cause serious injury or even death.
quick st rt
QUICK START GUIDE • GUÍA DE INICIO RÁPIDO
8500W Electric Start Inverter Generator
Generador Inversor de Encendido Eléctrico 8500W
ADVERTENCIA:
Lea el manual del operador COMPLETAMENTE para familiarizarse
con las características del producto antes de operarlo.
La falla en operar el producto correctamente puede resultar en daños al
producto, propiedad personal y causar lesiones graves o incluso la muerte.
www.championpowerequipment.com
© Champion Power Equipment 2022.
All Rights Reserved. / Todos los derechos reservados.
3649-M-OP REV 20220408
100719
EN ES
Advertisement
Related Manuals for Champion Global Power Equipment 100719
Summary of Contents for Champion Global Power Equipment 100719
- Page 1 QUICK START GUIDE • GUÍA DE INICIO RÁPIDO 100719 8500W Electric Start Inverter Generator Generador Inversor de Encendido Eléctrico 8500W WARNING: ADVERTENCIA: Read the ENTIRE operator’s manual to become familiar with the Lea el manual del operador COMPLETAMENTE para familiarizarse features of the product before operating.
- Page 2 Set Up / Montaje Open shipping carton. Assembly > Unboxing Abra el cartón de envío. Montaje > Desempacando Remove brackets. Assembly > Remove Shipping Support Brackets. Remueva las ménsulas. Montaje > Remueva las Ménsulas de Soporte de Envío. Attach wheel kit. Assembly >...
- Page 3 Start Up / Arrancar Add oil. Assembly > Add Engine Oil. Recommended: 10W-30, up to 37.2 fl. oz. (1100 ml) DO NOT overfill. 10W-30 Agregue aceite. Montaje > Agregue Aceite al Motor. Recomendado: 10W-30, hasta 37.2 fl. oz. (1100 ml) NO sobrellene. MAKE SURE SHIPPING BRACKETS ARE REMOVED BEFORE ADDING OIL.
- Page 4 Start Up / Arrancar Electric Start 1. Turn the EZ Start Dial to the “CHOKE” position. 2. Press and hold ignition switch. 3. Turn the EZ Start Dial to the “RUN” position. Encendido Eléctrico 1. Gire el dial EZ Start a la posición “AHOGAR”. 2.