Contact Fluke; Safety Information - Fluke LinkIQ User Manual

LinkIQ
Users Manual
Switch test if the Product detects a network device. See

Switch test with Ping test with Ping enabled and the Product detects a network device.

See Switch Tests.
Switch test with Power over Ethernet (PoE) with PoE enabled and the Product detects a

Power Sourcing Equipment (PSE) device. See

Contact Fluke

Fluke Corporation operates worldwide. For local contact information, go to our website:
www.flukenetworks.com.
To register your product, or to view, print, or download the latest manual or manual
supplement, go to our website.
Fluke Corporation
P.O. Box 9090
Everett WA 98206-9090
U.S.A.
+1-425-446-5500

Safety Information

General Safety Information is in the printed Safety Information document that ships with the
Product and at www.flukenetworks.com. More specific safety information is listed where
applicable.
A Warning identifies hazardous conditions and procedures that are dangerous to the user. A
Caution identifies conditions and procedures that can cause damage to the Product or the
equipment under test.
Before you use the Product for the first time, charge the battery for a minimum of
1.5 hours. See Battery.
To activate the input protection circuitry of the Product, turn on the Product
before you connect a cable to the Product. To turn on the Product, push
2
Fluke Europe B.V.
P.O. Box 1186
5602 BD Eindhoven
The Netherlands
info@flukenetworks.com
Switch
Switch Tests.
Note
Caution
Tests.
O
.