Fluke LinkIQ User Manual page 31

Item Description
Switch

summary button
Connected

speed
Table 11. Switch Test Results
1
24
Switch Name
Switchco XXXXXX
IP (3)
10.250.190.200
fd0c:10:250:192::8465
Connected Speed (1000 Mb/s Max)
2
1000 / Full
Advertised Speeds
3
10GBASE-T
5GBASE-T
2.5GBASE-T
1000BASE-T
100BASE-TX
10BASE-T
4
Ping 6 ms
192.168.86.1
5
Single
When the Product receives a compliant LLDP or CDP packet from
a device, the summary button shows the:
The number of the switch port that the device connects to

The switch name

The IP addresses of the switch. A maximum of two IP

addresses can show. Additional IP address may be listed on
the details screen. The number in parentheses indicates how
many IP addresses identify as available.
Tap to view detailed results. See
An unmanaged or non-compliant device may not report the
details of the switch.
When connected to a network, the maximum speed that the
Product connects to the switch. The maximum speed that the
Product connects to the switch may be slower than the maximum
advertised speed (
Duplex
Full Half
Dual B
Dual A
Function
) of the switch.

Cable+Network Tester
Switch Test Results
Switch Test Detail Results.
27