Switch Test Detail Results; Ping Test Results - Fluke LinkIQ User Manual

Switch Test Detail Results

Table 12 shows possible detail results of a switch test. When an item is not configured with a
name or description, -- shows.
Name
Switch Name
Switch Description
Port ID
Port Description
VLAN
VLAN Name
IP Address
MAC Address
Protocol

Ping Test Results

The Product pings a user-defined IP address, DNS server, and gateway 4 times.
With a successful test, the Product shows the IP address of each device and the response time
in milliseconds (ms) from each ping shows in the results.
If a ping attempt fails,
If one or more ping attempt fails, an error message shows with a description of the problem of
the first ping attempt that fails.
Table 13 shows possible results of a ping test.
Table 12. Switch Test Detail Results
The name of the nearest switch
The description of the nearest switch
The port number of the switch that the Product is connected to
The description of the port
The VLAN that is configured on the switch port
The name assigned to the VLAN
A list of IP addresses reported by the switch
The MAC address of the switch
The discovery protocols used by the switch protocols show.
There may be a combination of LLDP, CDPv1, or CDPv2.
shows instead of a time value.
Cable+Network Tester
Description
Switch Test Results
29