Contents PW3, a multi-function handle Compatible tools Precautions before use Personal protection equipment Protection of the environment General product view Specifications Compatible batteries User guide Tool gap adjustment Precautions for use and safety Servicing and maintenance Safety instruction Warranty conditions Advice Troubleshooting Technical information...
These specifications are given as an indication only. Under no circumstances may they be considered as > Ask the approved INFACO dealer for up-to-date information on the eco- contractually binding. They are subject to modification without prior notice in the interests of product development.
PW225S Only use INFACO brand batteries with a 48 Volt power supply. Any use with batteries other than INFACO batteries may lead to damage. The warranty on the motorized handle will be void if batteries other than those manufactured by INFACO are used.
Page 6
Mounting the handle > Tighten the wing nut > Connect the battery > Connect the power cable Using the machine > It is IMPERATIVE to fit the blade cover. > First start-up > Mounting the saw on the handle 1st start-up: 2 short presses on the trigger = ON Exit from standby mode: 2 short presses on the trigger = ON Normal operation: 1 long press on the trigger = ON Trigger release: OFF...
Tool gap adjustment Assembly on a pole Disconnect It is imperative to disconnect the machine. the power cord No movements GAP OK ADJUST Presence of movements THE GAP Tighten the wing nut...
Precautions for use and safety Storage and transport When storing and transporting the chainsaw, we recommend draining off the oil and storing the tool in a box, as oil seepage can occur. It is IMPERATIVE to fit the blade cover and disconnect the power cord for storage and transport.
Servicing and maintenance Changing the blade It is imperative to disconnect the machine from the battery All servicing and maintenance operations must be carried out with the tool disconnected from all power sources: Adapt the servicing frequencies to your tool use. New saw blade Occasional use, space out the frequency.
Safety instruction Cleaning and lubrication Zone to be lubricated IMPORTANT. To reduce the risk of electric discharges, injuries and fire when using electric tools, follow the fundamental safety measures indicated below. Read and follow these instructions before using the tool, and keep the safety instructions! Outside operations related to the use of the tool, your tool and its accessories must be disconnected and stored in their relevant packaging.
The possible immobilisation of the tool during repairs. free of oil. All work carried out by a person other than approved INFACO agents will cancel the tool Remove the tool keys. Before starting the machine, make sure the keys and adjustment warranty.
To validate the warranty, REGISTER IMMEDIATELY ONLINE ON : Branches too thick Cut thinner branches www.infaco.com, your warranty declaration or send this form filled out IN BLOCK CAPITALS AS SOON AS THE TOOL IS PURCHASED. Name > ............Prénom > ..........
Technical information or customer service INFACO S.A.S. Bois de Roziès 81140 CAHUZAC-SUR VERE France Phone: (+33) 05 63 33 91 49 - Fax: (+33) 05 63 33 95 57 Email: contact@infaco.fr Technical videos available on the website: www.infaco.com...