Slide Show - Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

1, 2, 3, 4, 5, 7
, ,
W.B./SHUTTER/IRIS/
2
BACKLIGHT
640 1200 640
3
640 640 1200
4
M.SLIDE
6
5
SLIDE

Slide Show

The recorded still pictures in the Card can be played back like a Slide Show.
You can set up a Slide Show or change the content.
To Select Pictures to Play Back in Your Slide Show
1
MF/VOL/JOG
After setting the [STILL/MPEG4/VOICE] Switch to [STILL],
1
set [CARD FUNCTIONS] >> [CARD EDITING] >>
PUSH
[SLIDE SHOW] >> [YES].
≥Slide Show editing screen appears.
1, 6, 7
2
Set [EDIT] >> [YES].
3
Rotate the [PUSH] Dial to select a picture and then press the
8
dial.
4
Rotate the [PUSH] Dial to select playback order and then
press the dial.
≥This step is skipped when there are no pictures set for the Slide Show.
5
Rotate the [PUSH] Dial to adjust the playback time and then
press the dial.
≥The Playback Order Indication
Indication
≥The [¥] Indication
selected for the Slide Show.
≥To select the next picture, repeat Steps 3 to 5 above.
6
Press the [MENU] Button to end the setup.
7
After setting [SLIDE SHOW] >> [PRESET], press the [MENU]
1
Button.
2
8
Press the [1] Button.
≥The [M.SLIDE!] Indication is displayed.
To Play Back All the Pictures Continuously
After setting the [SLIDE SHOW] to [ALL], press the [1] Button.
≥The [SLIDE!] Indication is displayed.
≥All pictures are played back for approximately 5 seconds each, from the first
to the last recorded picture, and playback then stops.
To Pause the Slide Show
Press the [;] Button.
SLIDE
≥The [(M.) SLIDE;] Indication is displayed.
To Stop the Slide Show
Press the [∫] Button.
To Verify the Selected Pictures
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>> [VERIFY] >> [YES].
≥Only the selected pictures are displayed in Multi-Picture Mode in the
Playback order.
To Delete the Selected Pictures
1 1 1 1
Set [CARD FUNCTIONS] >> [CARD EDITING] >>
[SLIDE SHOW] >> [YES].
2 2 2 2
Set [DELETE] >> [YES].
3 3 3 3
Select the picture you want to delete and press the [PUSH]
Dial.
To Reset the Slide Show Setup
Set [CARD FUNCTIONS] >> [CARD EDITING] >> [SLIDE SHOW] >> [YES]
>> [RESET] >> [YES] >> [YES].
≥Slide Show settings are reset.
≥For other notes, see page 63.
1
and the Playback Time (Second)
2
appear.
3
is displayed below pictures that have been
5
4
6
41