Playing Back Files From The Memory Card - Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

3, , 3
BACKLIGHT
CAMERA
STILL
2, , 2
STILL MPEG4 VOICE
RESET
CARD
MODE
OFF ON MODE
CAMERA
VCR
CARD P. B.
POWER
ACCESS
1, , 1
1
CARD CONTENTS
PICTURE
MPEG4
VOICE
PICTURE
2
100-0012
3
4
MPEG4
2
MOL012.ASF
3
4
VOICE
3
4

Playing Back Files from the Memory Card

It allows you to play back files recorded on a Card.
≥When you set the Palmcorder to Card Playback Mode, the Card Contents
1
are displayed to inform you which kind(s) of data (still picture, moving
picture and/or voice data) are recorded on the Card.
ª Playing back Still Pictures
1
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
2
Set the [STILL/MPEG4/VOICE] Selector to [STILL].
≥The still picture that was recorded last on the Card is displayed.
3
Start Playback.
1:
Start Slide Show (The [SLIDE!] Indication is displayed)
5: Playing back the next Picture
6: Playing back the previous Picture
∫:
Stop the slide playback
;:
Pause slide playback
ª Playing back Moving Pictures (MPEG4)
1 1 1 1
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
2 2 2 2
Set the [STILL/MPEG4/VOICE] Selector to [MPEG4].
3 3 3 3
Start Playback.
1:
Playing back
∫:
Stop the playing back
;:
Pause playing back (This button does not pause playing back within
2 seconds of finishing playing back.)
5: (Stop Mode) To the beginning of the next file.
(Playback Mode) To the beginning of the next file and start playback.
(Pause Mode) To the beginning of the next file and turns to Stop Mode.
6: (Stop Mode) To the beginning of the previous playback file.
(Playback Mode) To the beginning of the playback file and start
playback.
(Pause Mode) To the beginning of the file under playback and turns to
Stop Mode.
≥File is numbered in hexadecimal form.
≥When the object is moving fast or zoom operation is performed, picture may
appear to be still or mosaic noise pattern appears, but this is not a
malfunction.
ª Playing back Voice
1
Set the Palmcorder to Card Playback Mode.
≥The [CARD P.B.] Lamp lights up.
2
Set the [STILL/MPEG4/VOICE] Selector to [VOICE].
3
Start Playback.
1:
Playing back
∫:
Stop the playing back
;:
Pause playing back (This button does not pause playing back within
2 seconds of finishing playing back).
5: (Stop Mode) To the beginning of the next File.
(Playback Mode) To the beginning of the next File and start playback.
(Pause Mode) To the beginning of the next File and turns to Stop Mode.
6: (Stop Mode) To the beginning of the previous playback File.
(Playback Mode) To the beginning of the playback File and start
playback.
(Pause Mode) To the beginning of playback File and turns to Stop
Mode.
≥If the [6 6 ] Button or [5 5 ] Button is pressed for 1 or more seconds, it
6 6 5 5
becomes 10k playback and if pushed for 7 or more seconds, it becomes
60k playback. Releasing the Button brings back to normal playback.
2
Folder-File Number (When the PICTURE or MPEG4 is played back only)
3
Picture Size (When the PICTURE is played back)
Playback time (When MPEG4 data or VOICE data is played back)
4
File Number
To adjust the volume (Only Playing back MPEG4 and VOICE)
≥During playback, hold down the [PUSH] Dial until the volume Indication
appears and rotate it to adjust the volume. (l 28)
39