Using The Video Flash - Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

W.B./SHUTTER/IRIS/
2
MF/VOL/JOG
2
PUSH
2
1
;
%
F 7
640
W.B./SHUTTER/IRIS/
1
MF/VOL/JOG
2 1
PHOTO SHOT
PUSH
2
æ
1
£ ß
F 7 640
ª Automatically copying still pictures recorded on a
cassette
The Palmcorder copies images automatically, referring to Photo Index
signals.
1
After setting the Palmcorder to the VCR Mode (l 28).....
1
Set the Palmcorder to Still Playback Mode just before the
point where picture transfer is to commence.
1
BACKLIGHT
2
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >>
1
CAMERA
[RECORD TO CARD] >> [YES].
STILL
≥Search starts from the current Cassette position, and images with
Photo Index signals are recorded onto the Card sequentially.
≥While copying, the indication
To Stop the Transfer of Images
Press the [∫] Button.
≥For other notes, see page 62.
~~~~~~~~~~~~~~~~~~~~~~~~~

Using the Video Flash

Using the Video Flash of the Battery Adaptor Unit allows a PhotoShot in dark
places.
Video Flash can be used in SD Camera Style only.
1
Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >>
[FLASH] >> [ON].
2
≥The [ß] Indication appears.
≥Setting to [AUTO] allows the flash to fire when recording in a dark place.
2
Press the [PHOTO SHOT] Button.
1
To reduce the "red eye" phenomenon in your pictures
(Red Eye Reduction)
When setting the [RED EYE REDUCTION] in the [RECORDING SETUP]
Sub-Menu to [ON], the [£] Indication
≥The available range of the Video Flash is approximately 1 to 2.5 metres in a
dark place. Pictures will appear dark when they are recorded using the
Video Flash at distances greater than 2.5 metres.
≥Continuous PhotoShot is not possible if the Video Flash is used.
≥When this Palmcorder is used in SD Camera Style, the Palmcorder will
automatically detect the surrounding brightness and determine if the flash is
necessary or not. (Regardless of setting [FLASH] to [OFF], the [
when a source of light is necessary.)
1
appears.
1
2
is displayed.
ß
] flashes
37