Special Features; Dv Camera Style And Sd Camera Style; Attaching The Battery Adaptor Unit; Attaching The Battery - Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

2
5
1
4
2
2
OPEN
34

DV Camera Style and SD Camera Style

This is a Digital Video Camera which can be used in two ways depending on
3
the situation.
One is the DV Camera Style
Video Unit
Camera Unit
DV Camera Style
≥Both Tape and Card can be used.
SD Camera Style
≥It is easy to carry, because it's small and lightweight.
≥Tape cannot be used.
~~~~~~~~~~~~~~~~~~~~~~~~

Attaching the Battery Adaptor Unit

Mounting the Battery Adaptor Unit allows the Palmcorder to be compact as
well as light and portable.
1
≥Please carry out the Attachment/Removal of the Battery Adaptor Unit
CAMERA RELEASE
1
while the Palmcorder switch is off. Do not remove the Unit while the
operation mode lamp is lit.
1
While sliding the [CAMERA RELEASE] Lever
Camera Unit straight out in the direction of the lens.
2
Match the mark
Adaptor Unit.
3
Slide the Camera Unit until it locks with a click.
3
Removing the Battery Adaptor Unit
While sliding the [CAMERA RELEASE] Lever
straight out in the direction of the lens.
≥When the red portion
CAMERA RELEASE
3
Camera Unit is not completely installed, the Palmcorder cannot be powered
on. The Camera Unit must be shifted to the end again and locked.
~~~~~~~~~~~~~~~~~~~~~~~~

Attaching the Battery

1 1 1 1
Slide the [OPEN] Lever upwards to open the Battery Door
2 2 2 2
Insert the battery completely.
3 3 3 3
Close the Battery Door.
Removing the Battery
Slide the [OPEN] Lever to open the Battery Door, and then slide the Battery
Eject Lever
≥For other notes, see page 62.
2
1

Special Features

1
which combines the Camera Unit
3
, and the other is the SD Camera Style
2
and the supplied Battery Adaptor Unit
2
and place the Camera Unit on the Battery
3
of the [CAMERA RELEASE] Lever shows or the
2
. Finally slide the Battery to remove it.
2
and
4
which combines the
5
.
1
, pull the
1
, pull the Camera Unit
1
.