Turning On/Off The Palmcorder And Selecting Modes; Using The Viewfinder; Using The Lcd Monitor - Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

12:30:45PM
12:30:45PM 12:30:45PM
OCT 10 2002 OCT 10 2002
OCT 10 2002
OFF ON
2
180x
14
Turning on/off the Palmcorder and Selecting
Modes
Turn on the power first and then select Modes.
ª How to Turn on the Power
1
MODE
OFF ON
CAMERA
VCR
CARD P. B.
1
ª How to Switch Modes
1, 2, 3
2
ª How to Turn off the Power
3

Using the Viewfinder

Before using the Viewfinder, adjust the field of view so that the displays inside
12:30:45PM
the viewfinder become clear and easy to read.
OCT 10 2002 1
MODE
2

Using the LCD Monitor

With the LCD Monitor open, you can also record the picture while watching it.
1 1 1 1
1
2 2 2 2
2 1
3 3 3 3
Closing the LCD monitor
Push the LCD Monitor until the [PUSH OPEN] Button is securely locked.
ª Adjusting Brightness and Color Level
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES],
3
90x
the following items are displayed:
LCD Brightness [LCD BRIGHTNESS]
Adjusts the brightness of the image on the LCD screen.
LCD Color Level [LCD COLOR LEVEL]
Adjusts the color saturation of the image on the LCD screen.
Brightness of the Viewfinder [EVF BRIGHTNESS]
Adjust the brightness of the image in the Viewfinder.
1
2
Increasing the Brightness of the Entire LCD Monitor
Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].
≥These adjustments do not affect the recorded images.
≥For other notes, see page 67.
Set the [OFF/ON/MODE] Switch to [ON] while pressing the
1
center Button .
≥The [CAMERA] Lamp lights up.
Slide the [OFF/ON/MODE] Switch.
≥With each slide of the Switch, the Mode switches in the order of Camera
Mode, VCR Mode, and Card Playback Mode.
≥The appropriate Mode Lamp lights up.
Set the [OFF/ON/MODE] Switch to [OFF] while pressing the
1
center Button .
~~~~~~~~~~~~~~~~~~~~~~~~
Slide the Viewfinder backward to access the Eyepiece
Corrector Knob.
Adjust by sliding the Eyepiece Corrector Knob
Set the [OFF/ON/MODE] Switch to [ON].
Press the [PUSH OPEN] Button and, at the same time, bring
out the LCD Monitor about 90x in the direction of the arrow.
≥The Viewfinder goes off.
Adjust the LCD Monitor angle according to the desired
recording angle.
≥The LCD Monitor can rotate a maximum of 180x
position to the upward direction and a maximum of 90x
downward direction. Forcefully rotating the LCD monitor beyond these
ranges will damage the Palmcorder.
Press the [PUSH] Dial and select the item you want to adjust.
Rotate the [PUSH] Dial and increase or decrease the number
of the vertical bars on the Bar Indication.
≥The Bar Indication has 8 steps. A larger number of vertical bars
indicates stronger brightness or color saturation.
1
.
2
from the vertical
3
to the