Warning/Alarm Indications - Panasonic NV-DS30A Operating Instructions Manual

CONNECT WITH PC:
Movie Camera is connected with
PC.
WEBCAM: PC connection mode
(in Camera mode)
CAPTURE: PC connection mode
(in VCR mode)
STORAGE: PC connection mode
(in Card playback mode)
00: Remaining Number of Card
Photoshot pictures (l 39)
100-0001: DCF Number (l 40)
D-001: Number of prints set by DPOF
(l 43)
1(white): File Number ([640k480] Image
size)(l 40)
1(green): File Number ([320k240] Image
size)(l 40)
¥:
DPOF Setting completed (l 43)
640: [640k480] Image size
320: [320k240] Image size
≥For images not recorded with this Movie Camera,
the size display is determined as follows according
to the number of horizontal pixels.
640: From 640 to 800 (The size is not
displayed at under 640 pixels.)
SVGA: From 800 to 1024
XGA: From 1024 to 1280
SXGA: From 1280 to 1600
UXGA: Over 1600
ª To Change the Counter Display
Mode
By changing [C.DISPLAY] on the [DISPLAY
SETUP] Sub-Menu, you can change the Counter
Display Mode to Tape Counter Indication
[COUNTER] (0:00.00), Memory Counter Indication
[MEMORY] (M0:00.00), and Time Code Indication
[TIMECODE] (0h00m00s00f). (l 14) By repeatedly
pressing the [COUNTER] Button on the Remote
Controller, you can change the Counter Display
Mode.
ª To Display Date/Time Indication
To display Date/Time Indication, set the appropriate
Date/Time in [DATE/TIME] on the [DISPLAY
SETUP] Sub-Menu. (l 14)
You can also press the [DATE/TIME] Button of the
Remote Controller repeatedly to display or change
the Date/Time Indication.
ª To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY SETUP]
Sub-Menu, you can change the Display Mode to All
Function Display [ALL], Partial Display [PARTIAL],
and Minimum Display [OFF].

Warning/Alarm Indications

If any one of the following indications lights up or
flashes, please check the condition of the Movie
Camera.
≥Some Indications may not be displayed according
to the model.
3:
Condensation has occurred. (l 51)
Y:
The accidental erasure prevention
slider on the inserted Cassette is
open (that is, set to [SAVE]).
You are about to do audio dubbing
on the unrecorded (blank) portion of
the tape.
No Cassette is inserted. (l 12)
6:
The Battery is low. Recharge it.
(l 10)
0:
The built-in battery is discharged.
(l 17)
::
The video heads are dirty. (l 52)
2END:
The tape came to end during
recording.
REMOTE: Wrong Remote Controller Mode
has been selected. (l 46)
UNPLAYABLE TAPE (OTHER FORMAT):
You are attempting to play back
a tape section that has been
recorded with a different TV
system.
UNABLE TO A. DUB (LP RECORDED):
Because the original recording
was done in LP Mode, audio
dubbing cannot be performed.
INCOMPATIBLE TAPE:
This Cassette is incompatible.
CARD LOCKED: When you are attempting to
write the data on an SD Memory
Card whose write protection
switch is set at [LOCK].
FILE LOCKED: When you are attempting to
delete a locked picture. The
locked picture cannot be
deleted.
NO SPACE LEFT: Card does not have sufficient
memory remaining.
CARD FULL: Card does not have sufficient
memory remaining.
NO CARD: Card is not inserted.
NO PICTURE: Card has no pictures recorded
on it.
CARD ERROR: This Card is not compatible with
this Movie Camera.
45