Camera Mode; Recording - Panasonic NV-DS30A Operating Instructions Manual

1
AUTO
1
2
VCR
OFF
CAMERA
M-CARD
2
POWER
3
3 4
REC
RECORD
M-DEL
STILL/
MULTI
P-IN-P
M-STOP
5
18

Recording

When the [AUTO] Indication
Movie Camera automatically adjust the focus and white balance. In
some cases, they cannot be adjusted automatically and need to be
adjusted manually. (l 25, 27)
1
Set the [VCR/OFF/CAMERA/M-CARD] Switch to
[CAMERA].
AUTO/MNL FOCUS
≥The [POWER] Lamp lights up.
2
Press the [AUTO/MNL] Button for about 1 second to
display the [AUTO] Indication.
3
Press the Recording Start/Stop Button.
≥Recording starts.
≥After the [RECORD] is displayed, it changes to [REC].
ª To Pause the Recording
Press the Recording Start/Stop Button again.
The [PAUSE] Indication is displayed.
≥If the Recording Pause Mode continues for more than 6 minutes,
the power is turned off automatically for tape protection and power
conservation. To resume recording from this condition, turn on the
power again.
PAUSE ª To Check the Recording
PAUSE
By pressing the [S] Button
Mode, you can play back the last few seconds of the recorded
scene.
≥The [CHK] Indication is displayed. After checking, the Movie
Camera resumes the Recording Pause Mode.
ª To Finish the Recording
M-PLAY
Set the [VCR/OFF/CAMERA/M-CARD] Switch to [OFF].
BLC
BLC

CAMERA Mode

1
is displayed on the screen, the
2
4
5
briefly in the Recording Pause
3