Image Stabilizer Function; Fade In/Out Functions - Panasonic NV-DS30A Operating Instructions Manual

SIS/
P.B.DIS
LIGHT FADE
1
1
SIS/
LIGHT P.B.DIS FADE
REC
2,
1
2
22

Image Stabilizer Function

If the Movie Camera might be shaken while recording, the camera
REC
shake in the image can be corrected.
≥If the Movie Camera shakes too much, this function may not be
able to stabilize images.
1
To Cancel Image Stabilizer
Press the [SIS] Button.
≥For other notes concerning this item, see page 47.
~~~~~~~~~~~~~~~~~~~~~~

Fade In/Out Functions

Fade In
Fade In brings out images and sounds gradually from a black screen
1, 3
at the beginning of a scene.
,
1
2
3
Fade Out
Fade Out causes images and sounds to disappear gradually,
leaving a black screen at the end of a scene.
1 1 1 1
2 2 2 2
3 3 3 3
≥The still picture cannot fade in or fade out.
Press the [SIS] Button.
≥The [[] Indication
1
Keep pressing the [FADE] Button during the
Recording Pause Mode.
≥The image fades out gradually.
When the image is completely gone, press the
Recording Start/Stop Button to start recording.
Release the [FADE] Button about 3 seconds after
starting recording.
≥The image reappears gradually.
2
Keep pressing the [FADE] Button while recording.
≥The image fades out gradually.
When the image is completely gone, press the
Recording Start/Stop Button to stop recording.
Release the [FADE] Button.
1
appears.