Playing Back On Your Tv; Audio Dubbing - Panasonic NV-DS30A Operating Instructions Manual

[VIDEO IN] [S-VIDEO IN]
[AUDIO IN]
1
2
START/
DATE/ PHOTO
STOP
OSD TIME SHOT
3
COUNTER RESET ZOOM
W
1
M-DEL M-PLAY
STILL/
MULTI
P-IN-P
M-STOP
BLC
BLC
START/
DATE/ PHOTO
STOP
OSD TIME SHOT
COUNTER RESET ZOOM
T
REC A.DUB
¥
V /REW PLAY FF/ W
W
6 1 5
STILL ADV PAUSE/ITEM STILL ADV
E ; D

Playing Back on Your TV

By connecting your Movie Camera with your TV, the recorded
scenes can be viewed on your TV screen.
≥Before connecting them, turn off the power of both the Movie
Camera and TV.
1
Connect the [A/V IN/OUT] Socket of the Movie
Camera and the Video and Audio Input Sockets of
the TV.
≥Using the AV Cable
1
TV has an S-Video Socket, connect the S-Video Cable
supplied), too.
A/V
IN/OUT
PHONES
To Make the Indications Appear on the TV Screen
S-VIDEO
Press the [OSD] Button
≥For other notes concerning this item, see page 48.
~~~~~~~~~~~~~~~~~~~~~~
T

Audio Dubbing

You can add music or narration to the recorded Cassette.
≥If the tape recorded in the [16bit] Mode is dubbed with the Audio
Dubbing function, the original sound is erased. (If you wish to
preserve the original sound, use the [12bit] Mode when recording.)
≥Audio Dubbing cannot be performed on a recording done in LP
Mode. (l 19)
1
Switch the Movie Camera over to the Still Playback
Mode where you want to add new sound.
2
Press the [A.DUB] Button on the Remote Controller.
≥The same setting can be done using [RECORDING SETUP]
Sub-Menu on the [VCR FUNCTIONS] Main-Menu.
3
To start Audio Dubbing, press the [;] Button.
To Cancel Audio Dubbing
Press the [;] Button.
The Movie Camera is in the Still Playback Mode again.
To Play Back the Sound Recorded by 12bit Audio
Dubbing
Set [VCR FUNCTIONS] >> [PLAYBACK FUNCTIONS] >> [12bit
AUDIO] >> [ST2] or [MIX].
2
ST1: It plays back only the original sound.
ST2: It plays back only the sound added by Audio Dubbing.
3
MIX: It plays back both the original sound and the sound added by
Audio Dubbing simultaneously.
≥For other notes concerning this item, see page 49.
1
, make a connection with the TV. If the
3
on the Remote Controller.
2
(not
35