Related Manuals for Wampat W09B3101B
Summary of Contents for Wampat W09B3101B
- Page 1 Assembly Instructions W09B3101B Please read this manual carefully before beginning assembly of this product.Keep this manual for future reference.
- Page 4 This illustration shows how the CAM fastening system works. Esta ilustración muestra como funciona el sistema de fijación de leva. × 20 × 20 ×16 Cette illustration montre comment le système de fixation de la CAME fonctionne. × 16 × 2 ×...
- Page 5 × 8 × 8 × 1 × 4 ·Stick the skid pads (F) on the bottom of the legs (2). ·Install and fix the legs (2) on the four corners under the table by using parts (C, D, G). ３...
- Page 6 ·Screw parts (A) into panels (6,7,8).
- Page 7 ·Screw parts (A) into panel (5).
- Page 8 ·Attach panel (6) to panel (5). ·Insert and secure cam locks (B) to panel (6) to lock it.
- Page 9 ·Attach panels (7,8) to panel (6). ·Insert and secure cam locks (B) to panels (7,8) to lock it.
- Page 10 ·Attach panels (9,10) to panels (7,8). ·Insert and secure cam locks (B) to panels (9,10) to lock it.
- Page 11 ×8 ·Screw parts (A) into panels (11,12).
- Page 12 ×8 ·Attach panels (11,12) to panels (5,6,9,10). ·Insert and secure cam locks (B) to panels (5,6,9,10) to lock it.
- Page 13 ×6 ·Screw parts (A) into panel (1).
- Page 14 ×6 ·Attach panels (5,7,8,9,10,11,12) to panel (1). ·Insert and secure cam locks (B) to panels (5,7,8,11,12) to lock it.
- Page 15 ×1 × 3 × 2 ·Attach panel (13) to panel (5) by using parts(G,H). ·Screw parts (E) into panels (5,9,10).
- Page 16 ·Unscrew these four screws connected to the handles by the screwdriver, then exchange the position of the screws and the handles as shown in the picture and tighten the screws from the inside of the drawers.
- Page 17 × 18 × 1 ·Stick stickers (I) on cam locks (B). ·Stick part (J) on the bottom of panels (14), then slide the two small drawers into position.
- Page 18 ·Stick the skid pads (F) on the bottom of the legs (4). ·Install and fix the legs (4) on the four corners under the panel (15).
- Page 19 Attach panel (15) to cushion (3) with screws (L), and make sure the edges are evenly spaced. ·Screw parts (L) into panels (15,3).
- Page 20 WARNING We recommend it to be fixed to the wall to prevent the furniture from tipping over. Wall anchor and hardware are included in the package. Please make sure hardware is suitable for your walls before installation, as different wall materials may require different types of anchors. Ground...
-
Page 21: Final Assembly
Final Assembly...