comfortable humidity level in your baby's room. Contact your local Philips Consumer Care Centre
for stockists.
baby monitor.
Out of range alert
When the parent unit is out of range of the baby unit, the parent unit beeps from time to time and
the messages 'Searching' and 'Not linked' appear on the display. The LINK light on the parent
switched off.
Menu options
All functions can be operated on the parent unit, but some functions can also be operated on
the baby unit.
Menu operation - general explanation
Note: Menu functions can only be operated when a connection has been established between the baby
unit and the parent unit.
1
,
2
Use the – and + buttons to select the desired menu option (Fig. 31).
3
4
Use the + and - buttons to select the desired setting.
5
,
the display.
6
ECO mode
Note: You can only switch the ECO mode on and off in the menu of the parent unit.
You can use the ECO mode to reduce the energy consumption of the appliance. Monitoring your
baby from a small distance requires less transmission power and less electrical power
than monitoring your baby from a large distance. When you monitor your baby from a small
distance, you can activate the ECO mode. In the ECO mode, the appliance consumes
less energy, but still ensures that you can always hear your baby clearly without any distracting noise.
Using the baby monitor in the ECO mode helps you to preserve the environment.
open air. Depending on the surroundings and other factor that may cause interference, this range may be
smaller.
1
2
ENGLISH
13