Safety Plates And Symbols - National Flooring Equipment DL4000 Instruction Manual

Safety Section
2.3

Safety plates and symbols

Plates are affixed to the dust collector showing safety symbols and/or messages.
Attention!
Make sure all the safety messages are legible.
Clean these with a cloth, soap and water. Do not use solvents, diesel fuel or gasoline.
Replace the damaged plates with new ones supplied by NFE.
If a plate is affixed to a replaced part, make sure a new plate is affixed to the new part.
Attention!
Read the operator's and maintenance manual carefully before using the cleaner or doing any
maintenance jobs.
WARNING!
➢ ONLY SHAKE THE FILTER WHEN THE MACHINE IS TURNED OFF
IMPORTANT
DO NOT BREATHE IN INFLAMMABLE
AND/OR EXPLOSIVE LIQUIDS OR POWDERS
Warning!
Risk of crushing upper limbs while fitting and locking the material Longopac® container on the dust
collector.
Never place hands between the material Longopac® container and dust collector while locking.
Do not place hands on sides of Longopac® container near the guide pins while locking.
Perform the Longopac® container locking operation by means of the levers located on the side, USING
BOTH HANDS!
- 11 -