Table of Contents
Advertisement
Operation Section
3.5
Using the filter shaking system
This operation must only be performed with the machine switched off once the motor has come to a
complete halt.
The filter shaking system is best operated every time before use and after prolonged operation.
Caution!
During vacuuming, avoid rolling up or twisting the flexible hose
On the front of the dust collector, a filter pressure drop gauge indicates the degree of vacuum inside. If the
gauge indicates a high drop in pressure (while the dust collector is working and the collecting inlet is
disconnected from any equipment or accessories), the filter will have to be shaken by means of the special
lever. If the pressure gauge remains high, clean or replace the filter.
Caution!
Never use the machine with the filter blocked.
Caution!
If the arrow of the filter pressure drop gauge stays in the red area even after cleaning the filter, the hose
or suction accessory could be blocked. In this case, clean and remove the blockage.
- 19 -
Advertisement
Table of Contents
