3.3
Work cycle
Warning!
Before fitting the plug, make sure the power voltage corresponds to that on the CE marking plate.
➢
Make sure the power plug is correctly fitted in the power socket.
➢
Make sure the flexible hose is properly fitted and locked in the vacuum pipe union.
➢
Make sure the power cable and any extension used are integral and in perfect condition.
➢
Always use the caster wheel brakes to prevent the machine from rolling.
➢
Grip one end of the flexible hose complete with selected accessory.
➢
Press the Start button and start vacuuming.
➢
To stop the dust collector, press the Stop button.
Warning!
Before switching the dust collector back on, make sure the motors have come to a complete halt.
➢
After finishing work, disconnect the dust collector from the power socket.
- 16 -
Operation Section