4.4
Replacing the filters
To replace the filters, proceed as follows:
➢
Turn off the dust collector by pressing the motor STOP buttons.
➢
Disconnect the dust collector plug from the power socket.
Important!
Wear individual protection devices.
➢
Always use the caster wheel brakes to prevent the machine from rolling.
➢
Release the fasteners that locks the Longopac® container. Remove the Longopac® container.
➢
Disconnect the socket that connects the motor head with the electrical panel on the back side.
➢
Release the retainers that hold the motor head. Lift the motor head and rest this on a flat surface being
careful not to damage the power cable.
- 22 -
Maintenance Section