Safety
2.3
Safety plates and symbols
Plates are affixed to the dust collector showing safety symbols and/or messages.
Attention!
Make sure all the safety messages are legible.
Clean these with a cloth, soap and water. Do not use solvents, diesel fuel or petrol.
Replace the damaged plates with new ones supplied by NFE.
If a plate is affixed to a replaced part, make sure a new plate is affixed to the new part.
Attention!
Read the operator's and maintenance manual carefully before using the dust collector or doing any
maintenance jobs.
IMPORTANT
DO NOT BREATHE IN FLAMMABLE AND/OR
EXPLOSIVE LIQUIDS OR POWDERS
- 9 -